Index G200.2 Скачать руководство пользователя страница 15

Страница: 15 / 110

A022

- Check hydraulic system (visual inspection)

Orientation

To ensure trouble-free operation, periodic checks of the oil level are necessary. The

fill level must be between the upper and lower marks on the oil sight glass.

Only use hydraulic fluid grade 15/13/10 in accordance with ISO 4406.

Viscosity other than 32 according to DIN ISO 3448 is not admissible.

For all work in connection with operating materials, the information in

the data sheets of the respective manufacturers and the information

in the document Notes on Operating Materials must be observed.

Example: Hydraulic unit G200.2

Filler neck

Fill level indicator

Accumulator drain valve

Monitoring (level and temperature)

Oil drain plug

Monitoring (system pressure)

Hydraulic fluid filter hydraulic fluid HLPD32 (VG32)

Filter bowl

Screws on the hydraulic system, the connected components, and the

supply lines must be tightened to the manufacturer's specified

torques.

Maintenance Summary - Care activities

Maintenance Instructions

G200.2

DIE078EN - 05.06.2019

Содержание G200.2















































































































Результаты поиска

Содержание G200.2

Отзывы:

Похожие инструкции для G200.2

Бренды по названию

Популярные бренды

Index G200.2, Инструкция по обслуживанию

Результаты поиска

Содержание G200.2

Отзывы:

Похожие инструкции для G200.2

Бренды по названию

Популярные бренды