Index DW9937S, Руководство по обслуживанию

Страница: 43 / 112

__________Applications Information
Power-Supply Considerations
Overview
The MAX4051/MAX4052/MAX4053 and MAX4051A/
MAX4052A/MAX4053A construction is typical of most
CMOS analog switches. They have three supply pins:
V+, V-, and GND. V+ and V- are used to drive the inter-
nal CMOS switches and set the limits of the analog volt-
age on any switch. Reverse ESD-protection diodes are
internally connected between each analog signal pin
and both V+ and V-. If any analog signal exceeds V+ or
V-, one of these diodes will conduct. During normal
operation, these (and other) reverse-biased ESD diodes
leak, forming the only current drawn from V+ or V-.
Virtually all the analog leakage current comes from the
ESD diodes. Although the ESD diodes on a given signal
pin are identical, and therefore fairly well balanced,
they are reverse biased differently. Each is biased by
either V+ or V- and the analog signal. This means their
leakages will vary as the signal varies. The
difference in
the two diode leakages to the V+ and V- pins consti-
tutes the analog signal path leakage current. All analog
leakage current flows between each pin and one of the
supply terminals, not to the other switch terminal. This is
why both sides of a given switch can show leakage cur-
rents of either the same or opposite polarity.
There is no connection between the analog signal
paths and GND.
MAX4051/A, MAX4052/A, MAX4053/A
Low-Voltage, CMOS Analog
Multiplexers/Switches
X 1
Table 1. Truth Table/Switch Programming
X X All switches open All switches open All switches open
0 0 COM–NO0
COMB–NO0B,
COMC–NO0C
COMA–NCA,
COMB–NCB,
COMC–NCC
0 0
0 1 COM–NO1
COMB–NO1B,
COMC–NO1C
COMA–NOA,
COMB–NCB,
COMC–NCC
0 0
1 1 COM–NO3
COMB–NO3B,
COMC–NO3C
COMA–NOA,
COMB–NOB,
COMC–NCC
1 0 COM–NO2
COMB–NO2B,
COMC–NO2C
COMA–NCA,
COMB–NOB,
COMC–NCC
0 0
0 0
0 1 COM–NO5
COMB–NO1B,
COMC–NO1C
COMA–NOA,
COMB–NCB,
COMC–NOC
0 0 COM–NO4
COMB–NO0B,
COMC–NO0C
COMA–NCA,
COMB–NCB,
COMC–NOC
1 0
1 0
1 1 COM–NO7
COMB–NO3B,
COMC–NO3C
COMA–NOA,
COMB–NOB,
COMC–NOC
1 0 COM–NO6
COMB–NO2B,
COMC–NO2C
COMA–NCA,
COMB–NOB,
COMC–NOC
1 0
1 0
X = Don’t care * ADDC not present on MAX4052.
Note: NO and COM pins are identical and interchangeable. Either may be considered an input or output; signals pass equally well
in either direction.
ON SWITCHES ADDRESS BITS
ADDB ADDA
MAX4051/
MAX4051A
MAX4052/
MAX4052A
MAX4053/
MAX4053A
ADDC*
INH
41