Index C200-sl Скачать руководство пользователя

Страница: 79 / 102

D450

- Replacing hydraulic fluid

Orientation

Power off the machine and secure it against power on.

Use only approved hydraulic fluid. Details can be found in the

documentation and on the label of the hydraulic fluid tank.

For all work in connection with operating materials, the information in

the data sheets of the respective manufacturers and the information

in the document Notes on Operating Materials must be observed.

Requirement

Specification and quantity of hydraulic fluid as specified in the

technical data.

Before replacing the hydraulic fluid, make sure that the required spare parts such as

seals and filters are available.

Use only the original filters according to the spare or wear parts list.

Procedure

1. Suction off old fluid through the filler neck (a) or drain the fluid from the drain

plug (d) below the fill-level glass (c). Use a suitable collection bin for this

purpose.

Use only lint-free cleaning cloths or a sponge!

Maintenance Summary - 4.000 Operating hours

Maintenance Instructions

G220

DIE017EN - 05.06.2019

Содержание C200-sl







































































































Результаты поиска

Содержание C200-sl

Отзывы:

Похожие инструкции для C200-sl

Бренды по названию

Популярные бренды

Index C200-sl, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание C200-sl

Отзывы:

Похожие инструкции для C200-sl

Бренды по названию

Популярные бренды