23
Transportation, Installation, Commissioning
LL1602.10043 - 04.08.2014
ABC
INSTAllATION
Electrical connection
Installation
Electrical connection
Important notes
Caution! Danger of Life!
All work on the electrical equipment must be carried out exclu-
sively by properly trained qualified personnel.
The control voltage is to be connected, according to
EN 60204-1, one sided with PE. Please read the notes in the
wiring diagram.
The switchgear cabinet may be opened only after the main
switch have been set to the OFF position, and it must be se-
cured according to the valid safety standards.
See the order confirmation for the precise electrical requirements.
The electrical specifications provided are decisive and binding. They
must be available to
INDEX/TRAUB's
customer service at any time.
The machine must be connected to the electrical supply network via
the main switch (multi-wire cable). Be sure to observe the clockwise
phase sequence for the connection.
The electrical connection is indicated in the wiring diagrams.
The machine has been prepared for connection to three-phase cur-
rent.
Before connecting, check that the available line voltage matches the
machine's operating voltage. If this is not the case, you will need an
appropriate transformer connected in front of the machine.
