manualshive.com logo in svg

Index ABC 2 Series, Руководство по эксплуатации, Страница: 17 / 118

Поделиться
Скачать
Index ABC 2 Series Скачать руководство пользователя страница 17

A027

 - Replace the breathing filter at the filler neck of the hydraulic fluid tank.

Orientation

The breathing filter on the oil filler neck of the oil tank must be

Regular regularly replaced depending on the ambient conditions.

Due to different requirements and/or specifications of the respective

manufacturers, be sure to review the respective manufacturer's

documentation!

Filters are hazardous waste and must be disposed of in a controlled

manner.

Requirement

It is essential to keep the filter described here in stock. It is not permitted to owner

the machine without this filling and breathing filter.

Use only the original filters according to the spare or wear parts list.

Only filters with retained particle sizes described in the fluid plans

must be used.

Maintenance Summary - Care activities

11

Maintenance Instructions

ABC.2

DIE244EN - 15.08.2022

Содержание ABC 2 Series























































































































Отзывы:

Нет отзывов