5
GB
5. Turn the knob from the MAX position to the MIN
position quickly or open and shut the oven door,
making sure that the burner is not extinguished.
Adapting the grill
Replacing the grill burner nozzle:
1. Remove the oven burner
after loosening screw V (
see
figure).
2. Unscrew the grill burner
nozzle using a special nozzle
socket spanner (
see figure) or
preferably with a 7 mm socket
spanner, and replace it with a
new nozzle that is suited to the
new type of gas (
see Burner and
nozzle specifications table).
!
Be careful of the spark plug wires and the
thermocouple tubes.
!
The oven and grill burners do not require primary
air adjustment.
!
After adjusting the appliance so it may be used
with a different type of gas, replace the old rating
label with a new one that corresponds to the new
type of gas (these labels are available from
Authorised Technical Assistance Centres).
!
Should the gas pressure used be different (or vary
slightly) from the recommended pressure, a suitable
pressure regulator must be fitted to the inlet hose in
accordance with current national regulations relating
to “regulators for channelled gas”.
Table of burner and nozzle specifications
V
I
S S
R
A
TECHNICAL DATA
Oven dimensions
(HxWxD)
34x39x38 cm
Volume
50 l
Useful
measurements
relating to the oven
compartment
width 42 cm
depth 44 cm
height 18 cm
Power supply voltage
and frequency
see data plate
Burners
may be adapted for use with any
type of gas shown on the data
plate, which is located inside the
flap or, after the oven
compartment has been opened,
on the left-hand wall inside the
oven.
EC Directives: 2006/95/EC dated
12/12/06 (Low Voltage) and
subsequent amendments -
2004/108/EC dated 15/12/04
(Electromagnetic Compatibility)
and subsequent amendments -
2009/142/EC dated 30/11/09
(Gas) and subsequent
amendments - 93/68/EEC dated
22/07/93 and subsequent
amendments - 2002/96/EC.
1275/2008 (Stand-by/ Off mode)
We recommend cleaning the oven before using it for the
first time, following the instructions provided in the
"Care and maintenance" section.
KN1G21S/HU
Table 1
G20
G30
Diameter By-pass
1/100
Thermal
Power kW
Nozzle
1/100
Thermal
Power kW
Flow*
l/h
Nozzle
1/100
Thermal
Power kW
Flow*
l/h
Burner
(mm)
(mm) Reduced (mm)
(mm)
Fast
(Large)(R)
100 41 0.80 116 3.40 324 86 3.00 218
Semi Fast
(Medium)(S)
75 30 0.50 103 2.20 209 70 1.90 138
Auxiliary
(Small)(A)
55 30 0.50 79 1.15 109 50 1.00 73
Oven -
46
1.00
119
3.20
305
80
2.80
204
Grill -
-
-
114 2.50 238 75 2.30 167
Supply
Pressures
Nominal (mbar)
Minimum (mbar)
Maximum (mbar)
25
20
30
28-30
20
35
At 15 °C and, 1013 mbar , dry gas
P.C.S. G20
37,78 MJ/m3
P.C.S. G30
49,47 MJ/Kg
