Indel GIN-SAC4 Series Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 94

Indel GIN-SAC4 Series Скачать руководство пользователя страница 30

SAC4xX User Manual

01.04.2020

Rev 1.42en

30

5.

Stop/Emergency Power Off functions in accordance with EN 60204

In the case of the Indel GIN-SAC4 Servo Drives, additional external safety switching devices can be
used to implement category 0 and 1 stop functions in accordance with EN 60204-1. The different stop
categories as explained in EN 60204 are listed below.

Stop Category 0
Stop by immediately switching off the power supply to the machine drives. Uncontrolled stop of the
axis.
Stop Category 1
A controlled stop of the axis. The power supply to the machine drives is maintained in order to decelerate
the axis in a controlled manner within a defined period of time. After this defined period, the power sup-
ply is interrupted.
Stop Category 2
A controlled stop, in which the power supply to the machine drives is maintained. The braking ramp
and the stop are monitored.

5.1.

Emergency stop

According to EN60204, an emergency stop is defined as a stop of category 0 or 1. The choice of the appro-
priate category depends on the risk assessment of the machine.

5.1.1.

Implementing emergency stop category 0

The following example of use is non-binding and is for illustrative purposes only. Only the implementa-
tion of category 0 emergency stop is shown, and this bears no relation to the final performance level.



Immediate switching off of the power supply to the machine drives by the STO



Axes can spin out



Emergency Stop Category 0

«
...
28
29
30
31
32
...
»

Содержание GIN-SAC4 Series































































































Отзывы:

Нет отзывов