Golden Tee
®
Home Edition
Page 8
© Copyright 2020 Incredible Technologies, Inc. All Rights Reserved. Unauthorized duplication is a violation of applicable law.
All other marks are the properties of their respective owners. All rights reserved. PN 815000356RB
GENERAL CABINET MAINTENANCE
Games that are in good working condition, with clear monitors, clean control panels and working trackballs are
easier to play and more fun than those in poor condition. It is definitely worth your time and attention to protect
your investment with a little common care. Each week, clean the display and wipe down the control panel to bring
back that new game look. Test the trackball and buttons regularly to make sure they are playing properly.
CARE AND CLEANING OF RUBBER BUMPER
The rubber bumper on the front of the cabinet’s control panel is made from durable nitrile rubber. Clean it using a
mild soap and water solution or blue window cleaner.
NIGHTHAWK AIR FILTER
The Nighthawk System Box comes equipped with an external electrostatic air filter. This filter is held in place by a
metal bracket, attached to the system box. The filter prevents debris from entering the system box and damaging
the electronic components. A clogged filter will impede airflow, thus building up unwanted heat which can cause
damage to your hardware. Be sure to check this filter at least once a month. Remove the filter by sliding it out of
its housing. Shake off excess dirt and if necessary clean it with soap and water. Be sure the filter is completely
dry before reinstalling the filter.
TRACKBALL MAINTENANCE
The trackball will require periodic maintenance to assure optimum performance. In most cases the inside of the
trackball simply needs to be cleaned of any accumulated dust and debris.
To access the inside of the trackball, remove the 6 Phillips head screws that hold the trackball together and
remove the top cover. Clean out any dust and debris inside the trackball. Polish the rollers and remove any
foreign material that may be on the rollers. Do not lubricate the bearings, as this will only attract more dust. If the
bearings do not spin freely it is best to replace the bearing assembly. Inspect the rollers for any nicks that may
cause poor performance and replace if needed. Inspect the ball for any nicks and replace if needed.
Parts can be obtained from Happ Controls and is an economical option rather than replacing the entire trackball
assembly.
It is critical that the green field ground wire be properly connected to field ground. This prevents the trackball from
building a static charge that can cause the game to lock up or reset. A static discharge can also damage the
trackball’s electronic components, as well as the main system.
CARE AND CLEANING OF COOLING FANS AND VENTS
The hardware that runs the Golden Tee Home Edition is quite sophisticated, and many of the chips and
processors will get hot very quickly. Like your desktop PC, the Golden Tee Home Edition hardware needs
adequate ventilation to work properly. Dust and dirt can be a major cause to overheating and will lead to costly
repairs. At least once a month, check to make sure the cabinet and system box fans are working and free of dust
and debris. Use a vacuum to clear all the ventilation holes on the cabinet at this time as well.
CAUTION:
Incredible Technologies cabinets are shipped with the USB cables disconnected from the I/O
Board and the Cabinet Identification Device (CID). This prevents vibrations during shipment from
damaging the contacts on the connectors. These cables must be connected before operating the
equipment.
IT recommends disconnecting these USB cables whenever transporting the unit.
Содержание Golden Tee Home Edition
Страница 1: ...Rev 10 2020 ...