background image

I N S TA L L AT I O N I N S T R U C T I O N S

50-640

Attention!

  

Let the vehicle sit with the key 

out of the ignition for a few minutes before 

removing the factory radio. When testing the 

aftermarket equipment, ensure that all factory 

equipment is connected before cycling the  

key to ignition.

KIT COMPONENTS

•  A) Radio trim panel • B) Radio housing • C) Sub dash brackets • D) Radio brackets • E) Panel clips (3) • F) #8 x 1/2” Phillips screws (4)

• Panel removal tool • 9/32” socket 
• Phillips screwdriver • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly
–ISO DDIN radio provision .....................................4
–Pioneer Modular radio provision .......................5

TOOLS REQUIRED

A

C

D

E

F

B

Ford 

Transit

 

2020

KIT FEATURES

•  ISO DDIN radio provision*
•  Painted scratch resistant matte black

*  This kit is designed for an ISO DDIN radio which have an “L” shaped chassis 

design, with the radio chassis at the bottom of the screen, 

or Pioneer modular 6.8” radios. 

Refer to the radio manufacturer for current models

Содержание 50-640






Отзывы: