Inateck BCST-55, Инструкция по эксплуатации

Страница: 8 / 67

3
LED Indicator
Indicator Status Explanations
Green LED flashes Bluetooth reconnection
Green LED flashes once Successful scanning and data is uploaded
Blue LED flashes Bluetooth pairing
Blue LED flashes once Scan is successful and data is stored in buffer
Blue LED is on Under setup mode
Yellow LED flashes Battery is running short
Red LED is on
Under charging (Red LED goes off once the barcode scanner is
fully charged)
Buzzer
Sounds Explanations
One short high-note sound (100ms) Successful scanning
One short high-note sound (20ms)
Data has been uploaded from buffer to
computer/phone
One long high-note sound (400ms)
Wrong settings (under setup mode, blue
LED lit)
Failed Bluetooth pairing (ring only during
pairing)
The buffer is full, barcode is not stored, and
the scan is invalid
Two or more long high-note sound (800ms) The USB is under configuration
Three-note chord (volume from low to high)
Enter setup mode (blue LED lit)
Exit setup mode (blue LED off)
Three-note chord (volume from high to low) Remind of Bluetooth connection
Two short sounds (same volume) The Bluetooth connection has stopped
Two short sounds (volume from low to high) Indicate correct settings
Two short sounds (volume from high to low)
The BCST-55 has disconnected from a
computer/phone
Two long sounds (volume from high to
medium) The scanner has been powered on under
wireless mode (with USB disconnected)
Two long sounds (volume from medium to
high) The scanner has been powered off under
wireless mode (with USB disconnected)