inada HCP-G900, Руководство по эксплуатации, Страница: 14 / 52

11
[POSITION ADJUSTMENT
]
① ②
POSITION ADJUSTMENT
How to Sit
The mechanism is normally drawn back into the leg section (storage position).
For safety, fi rst check the position of the mechanism. If it is in any position other than the storage position, turn the
main power switch ON before sitting down to allow the mechanism to return to its storage position. When you fi nish
checking, sit down slowly in the center of the seat.
Caution
● Do not sit down on the chair when it is in the reclined position.
→ Any sudden impact on the footrest or reclining seat back could cause damage to the mechanism. Also, an accident or injury may
result if the chair tips over.
● Remember to start off with a lighter massage.
Headrest Adjustment
The position of the headrest can be adjusted using the Velcro on the back of the headrest. Adjust the small headrest to
match the position of your head before starting the massage.
Correct headrest position
Behind the head
(back of the head).
Behind the neck.
● Place the headrest in the proper position. If it is not placed properly, the automatic shiatsu point locator may not function properly.
The headrest cover can be removed following the procedure below.
* Be careful at this time, because the headrest cover may tear if you turn it over with undue force.
* Attach the cover by following this procedure in reverse.
Cover slit
① Pull the cover slit upwards to move it
out of place.
② Pull the sides of the cover slit, and
remove the headrest from the slit.
Pull here
Headrest
Headrest sheet
Headrest Cover
Headrest
Cover
How to Remove the Headrest Cover
Velcro
Velcro
Align the headrest
position with the Velcro
attachment position.
Headrest
Pad
* Image from above the reclining seat back.
* Headrest back
Pull here