inada HCP-G900, Руководство по эксплуатации

Страница: 12 / 52

9
[BEFORE USE]
Caution
● When the remote controller is inserted in the remote controller holder, be careful of the remote controller cable.
Insert the remote controller into the holder for
use, as shown in the fi gure on the right.
BEFORE USE
How to Install the Remote Controller Stand
The remote controller stand can be installed to the arm rest (left or right).
Install the remote controller stand to the armrest which removed from the chair.
Curled cord
Operating
Guide
Tighten
Remote Controller
Stand
Installation screw
(short)
L-shaped
Wrench
Installation
screw hole
Securely fasten the remote controller stand with the included installation screws (short) from the rear of the arm rests.
Perform these steps in reverse order to remove.
After installing the remote controller stand, connect the curled cord protruding from the remote controller stand to the
operating guide.
Armrest (Right)
rear side
Curled cord
* For installation, use the L-shaped wrench provided.
Spread out the
material