IN2CORE ScreenPort SDI, Руководство пользователя

Страница: 8 / 12

finish recording. If the SDI signal contains timecode, it will be recorded too. In case of missing
timecode, current time of day will be used instead.
AUTO-RECORD
In addition to manual recording, some cameras provide SDI record flags that can be used to
initiate automatic recording. To set the ScreenPort SDI+ to auto-record mode, tap the AUTO REC
button (ARRI and SONY cameras are currently supported).
BROWSE
Tap the VIEW/CLIPS button in the bottom left corner to show the clip browser. Use the DAYS/CLIPS
button in the top left corner to switch between days and clips mode. Each day item represent
folder that contain all clips shot during that day. Tap the day thumbnail to show corresponding
clips.
LOAD
Tap the LOAD/SELECT button to switch between load and selection modes. When the load mode is
active, you can tap the clip thumbnail to load the clip into the viewer.
SELECT
When selection mode is active you can tap or drag your finger through browser items to select
them. Selected items are marked with blue color.
DELETE
Tap the DELETE button to remove items from the browser and delete corresponding media files
from the device.
PLAYBACK
Once the clip is loaded into viewer, it can be played back. In addition to realtime playback, there are
two buttons to the right of the PLAY button that allow you to navigate clip frame by frame. Two
buttons to the left of the PLAY button are used to jump to the start or the end of the clip.
SLIDER
Time slider is placed above playback icons and it is used to scrub through the clip. Slider
represents the whole duration of the clip.
JOG
For more precise navigation through the clip, you can drag your finger horizontally over the viewer.
FUNCTIONS
Switching the INFO/FUNC button to function mode provides access to various functions of the
ScreenPort app.
July 30, 2021 SCREENPORT SDI+ USER GUIDE 7