800-446-7488
21
www.in-situ.com
4. Select the GSM band for your geographical area and click the Set GSM band
button.
5. Select whether your network is 2G or 3G and click the Set network button.
6. Click the Verify SIM and PIN button.
7. Click the Show signal quality button if you are near your deployment area.
8. Click the Deactivate modem button.
9. Close the window.
SIM Card
Tube 300 units require a SIM card for communication over the wireless network.
If you are managing your data plan through In-Situ, a SIM card is installed in the
equipment prior to shipment.
If you are managing a data plan through a third party, you must obtain a SIM card from
their service provider and install it yourself. Consider if your application requires a static
IP address when purchasing the SIM card.
Once a SIM card is obtained, install it in the Tube as shown below.
The SIM card slot is located between the two circuit boards, next to the circular cutout
closest to the battery terminal.
