IMYAQA DCCD Controller
is a controller for controlling the central differential of
the cars having five or six-speed transmission with DCCD or center differential
automatic transmission VT
D.
The controller has 2 modes – manual and automatic ones. In the manual mode
the driver independently adjusts the lock level. There are 5 adjustable maps in the
automatic system: two of them are set to the «winter» and «summer» modes,
three ones are independently adjusted at the request of the driver with the help of
software.
You can control the controller: a AUTO button with a DCCD wheel and a Si-Drive
panel or a switch on the controller panel. The level lock can be tracked on the STi
DCCD cluster or on the controller.
Сontrol of operating modes:
To switch between manual and automatic modes, press the auto button.
To
switch map sets in automatic mode, hold down the auto button until the LED
blinks. After this, short pressing select the desired mode. While driving, switch
modes on straight sections of the road, since the controller will need 0,5 seconds
to load a new map.
Characteristics:
џ
D
imensions 94×57×28 mm
џ
Aluminium case
џ
Supply voltage: 9 to 15 volts
џ
Consumed current with unlocked DCCD, not more than: 300mA
џ
Consumed current with locked DCCD, no more than 10A
џ
Frequency of signal processing, at least 250 times per second
Trust the installation of the IMYAQA DCCD Controller to a qualified mechanic.
If there are any problems, we will help you. To do this, write to the
e-
. Remember that you are solely responsible for the incorrect
installation of the IMYAQA DCCD Controller.
SPECIFICATION
Manual for IMYAQA DCCD Controller
A
I
II III
IMY
AQA.COM
miniUSB
socket
mode «
summer
»
mode
«
winter
»
three additional settings
d
isplaying the active map/the level lock
(
In manual mode shows the level
l
ock. In
AUTO mode it can show either the selected
map or the level of lock, depending on the
setting.
)
automatic mode indicator
switch
