User Manual
IQL® Helios Area-/Streetlight
User Manual
IQL® Helios Area-/Streetlight
3
Version 4.6 201302
1.
Safety
In order to use the product safely and optimise the life of the product, the following instructions must be
observed.
Only qualified personnel may install the product.
Work in accordance with locally applicable safety standards and regulations.
Ensure there is a reliable connection to the earthing system.
Do not clean the light fitting with a high pressure steam or water jet, to avoid damage not covered by
warranty.
2.
Warranty
2.1
General
The guarantee on the IQL® Helios fittings is only applicable when the light fitting is used within the operational
limits.
Operational limits are:
The minimum and maximum ambient temperature for the IQL® Helios fittings are -20°C to +40°C.
The light fitting must be installed by a qualified person and in compliance with the installation
instructions.
Damage caused by incorrect installation, accidents or external influences such as lighting strike and
harmonic distortion not in accordance with EN 50055 are not covered by the guarantee.
The lighting level of the light fitting depends on the temperature and is therefore not covered by the guarantee.
If an IQL® Helios fitting fails within the warranty period, IMT B.V. will supply a new fitting with a comparable
specification free of charge. Before the guarantee can be confirmed, a defective light fitting must be sent to
IMT B.V. at the user’s expense for inspection. After this inspection the user will be informed of the result(s).
See invoice for individual guarantee agreements.
2.2
Life span
Switching the light fitting with a semiconductor photoelectric cell or a semiconductor relay has no known effect
on the life span of the light fitting.
It is expected that more than 70% of the original illumination power will be retained after 80,000 operating
hours
.
