IMT 70735257, Руководство пользователя

Страница: 24 / 29

LED Troubleshooting 20 Section - 6
LED Diagnostic Troubleshooting
INDICATION CAUSE
SOLUTION
*
+V1, +V2, +V3 POWER LED NOT
ACTIVE
ELECTRICAL SIGNALS NOT
ACTIVATING THE LEDs
• IS +VDC INPUT POWER PRESENT.
• CHECK INPUT POWER POLARITY.
RTX / RRX NOT ACTIVE
• CHECK FOR OBSTRUCTIONS
PREVENTING LINE-OF-SIGHT.
• CHECK THAT REMOTE UNIT IS
ACTIVE.
• RE-ASSOCIATE THE REMOTE UNIT
WITH THE BASE UNIT.
CTX / CRX NOT ACTIVE
• CHECK CAN WIRING.
• CHECK THAT THE REMOTE UNIT IS
ACTIVE.
• RE-ASSOCIATE THE REMOTE UNIT
TO THE BASE UNIT.
OUT LED NOT ACTIVE
• CHECK THAT THE REMOTE UNIT
LEDs ARE ACTIVE WHEN THE
APPROPRIATE BUTTONS ARE
PUSHED.
ERR LED ACTIVE
OVER-TEMPERATURE OR
OVER-CURRENT CHANNEL
INDICATION
• CHECK THE OUTPUTS FOR LOOSE
WIRING, ETC.
• ACTIVE CHANNEL CURRENT
CONSUMPTION LESS THAN 1 A
TYPICAL. (THIS IS NOT A PROBLEM
IN CASES WHERE LESS THAN 1 A
DRAW IS A NORMAL CONDITION.)
HEALTH LED BLINKING RAPIDLY INDICATES AN INTERNAL PROBLEM. • CONTACT IMT TECHNICAL SUPPORT
*
IF THE RECOMMENDED SOLUTIONS DO NOT RESOLVE THE ISSUE, CONTACT IMT TECHNICAL
SUPPORT DEPARTMENT.
06/15/2022 SII Telescopic Proportional Electric Crane Radio Remote