IMT Analytics CITREX H3, Руководство пользователя

Страница: 27 / 46

27
Configuration tool
9
IMT Analytics AG
The configuration tool can only be used with Microsoft Internet Explorer.
Microsoft® Silverlight 5 or higher
Windows x86 or x64 (64-bit mode only supports IE) 1.6 GHz or higher
with 512 MB RAM
Macintosh (Intel based) Intel Core Duo 1.83 GHz or higher with 512 MB RAM
Microsoft® Windows® 10, 8.1, 8, Windows Server 2012, 7, 7 SP1,
Windows Server 2008 SP2, Windows Server 2008 R2 SP1, Vista
Macintosh OS 10.6 (Intel based), MacOS 10.7 – 10.11 (Intel based)
Ethernet network connection
Screen resolution 1024 × 768 (1280 × 1024 recommended)
The Ethernet port on CITREX H3 enables access to the device via a network. Settings
can be made on the device via the web browser using the so-called configuration
tool. The oxygen option can also be enabled with the web server. The prerequisite for
using the web server is an installed Internet Explorer with Microsoft Silverlight 5.
There are three different setting options to establish a connection between CITREX
H3 and a computer. Tap the

button until the "Ethernet" menu item appears. You
will find a description of the settings in the following sections.
9.2.1 Default
These are default settings that cannot be changed. These settings are recommended
in order to establish a direct connection to the computer via an Ethernet cable. The
configuration on CITREX H3 is as follows:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
To establish a connection, the network settings on the computer must be changed.
For this purpose open the network settings of the computer, which are located in
the Control Panel. Then open the "Internet Protocol Version 4 (TCP/IPv4)" settings.
Enter an IP address between 192.168.1.2 and 192.168.1.255 and subnet mask
255.255.255.0 in the form on the screen.
Now open Internet Explorer and enter IP address 192.168.1.1 in the address field.
The connection to CITREX H3 is established.
9 Configuration tool
9.1 PC minimum requirements
9.2 Web server