IMS Mforce micro drive, Справочник, Страница: 36 / 92

2-6
Motion Control MForce MicroDrive Hardware Manual Revision R112706
Aux-Logic Supply Connection
The Auxiliary Logic input will maintain power to the Logic circuitry in the absence of motor power. The user will still be
able to communicate with the device, however motion commands will be ignored and the internal counter will update by
the number of pulses commanded. If stall detection is enabled a stall will register.
!
Black
Pin 6
Pin 5 Pin 5
Pin 16
1 2 3 4 5 6 7
7-Pin Pluggable Terminal
16-Pin Wire Crimp
12” Flying Leads
A
A
A
P1
P1
A
B
B
B
B
Aux-Logic Voltage: +12 to +24 VDC
Aux-Logic Power Requirement:
1.93 Watts (Worst Case)
B
10-Pin IDC
Supply
10-Pin Wire
Crimp
P2 P2
DO NOT Ground the Logic Supply at
Communications Ground or damage will occur
to the drive. Ground Aux Logic at Power Ground.
Side View Front View
+12 to +24 VDC
Ground
Figure 2.1.3: Aux-Logic Connection