MODEL NUMBER:
SGI913-1-0-GB-XX
I
MPRO
X SKA
ImproX (SKA) 125 kHz SupaGate Keypad Antenna Reader
INSTALLATION MANUAL
SPECIFICATIONS
Working Environment
.................
Designed to work in an indoor or outdoor
environment similar to IP53. The ImproX SKA
is, therefore, sealed (potted) against water.
Buzzer
...........................................
Single tone, 4 kHz.
Keypad
..........................................
12 Alphanumeric keys.
Status Indicators
Status LED .............................
Bi-coloured Red or Green.
INSTALLATION INFORMATION
Accessories
Find the following when unpacking the Antenna Reader:
An ImproX SKA Antenna Reader housed in a Black tinted, Polycarbonate Plastic
Housing. The ImproX SKA consists of the Front Cover Antenna Reader Assembly
(fully potted) and a Backing Plate. The Front Cover Antenna Reader Assembly
includes a 2 m (7 ft) shielded multi-strand 3-pair twisted open-ended connection
cable.
Four Brass Wood Screws (3.5 mm x 25 mm).
Four Wall Plugs (7 mm).
An extra Serial Number Label.
General
Remember the following when installing the Antenna Reader:
Maximum Data Communications Distance
The ideal cable distance between the ImproX SupaGate Controller and the ImproX
SKA ranges between 2 m to 16 m (7 ft to 53 ft). Achieve this by using a good quality
shielded multi-strand 3-pair twisted cable. The cross-sectional area of the cable must
not be less than 0.2 mm
2
(0.0003 in
2
).
