background image

 

MDR300-0-0-GB-08 

July 2015 

Page 4 

 

INSTALLATION INFORMATION 

Accessories 

Find the following when unpacking the Multi-discipline Reader: 

  Either an Impro (MDR) Multi-discipline Reader (MDR901-5-0-GB-XX/HRW900-5-0-

GB-XX) housed in an ABS Plastic and 304 Stainless Steel housing.  The Multi-

discipline Reader consists of a Front Cover assembly and a Backing Plate (the 

Backing Plate is attached with a Hexagonal Screw (M3 x 8 mm)).   

  Or an Impro (MDK) Multi-discipline Keypad Reader (MDK901-5-0-GB-XX/ 

HRW901-5-0-GB-XX) housed in an ABS Plastic and 304 Stainless Steel housing.  

  OR a Multi-discipline Junction Box Reader ((HRK900-0-5-GB-XX) / Multi-discipline 

Junction Box Keypad Reader ((HRK901-0-5-GB-XX) housed in a Black, ABS 

Plastic housing.   

 

The Multi-discipline Reader consists of a Front Cover assembly and a Backing 

Plate (the Backing Plate is attached with a Hexagonal Screw (M3 x 8 mm)).   

  One 2-Way Programming Pin. 

  An Allen Key (2 mm). 

  An extra Hexagonal Screw (M3 x 8 mm). 

  An extra Serial Number Label. 

 

The Junction Box Reader consists of a Front Cover and a Backing Plate Assembly 

(the Front Cover is attached with a Combi Screw (6 mm x 2.2 mm)).  The Backing 

Plate Assembly includes 1 m (3.28 ft) of 10-core, 6.2 mm cable.   

  One 2-way Programming Pin. 

  An extra Serial Number Label. 

 

General 

Remember the following when installing the Multi-discipline Readers: 

Maximum Data Communications Distance 

Install the Multi-discipline Readers no further than 150 m (164 yd) from the Host unit.  

The cable individual conductor may be AWG 20 to AWG 22 cross-sectional area should 

not be less than 0.644 mm

2

 (0.0253 in

2

).      

NOTE: 

You can expect a drop in read range on 13.56 MHz Tags if noise exists on 

the Reader’s input supply.  The following good wiring practices lessen noise 

introduction:  Use a well shielded cable with a drain wire, ensure connection 

of the drain wire to a clean Earth point.  Also, install cables away from high 

voltage cabling and other noise (that is wireless equipment, machinery and 

so on) sources. 

Содержание HRK900-0-5-GB Series





















Отзывы: