Impex MD-7502, Руководство пользователя

Страница: 8 / 13

STEP 3 (See Diagram 3)
A.) Attach the Leg Developer (#11) to the open bracket on Main Seat Support (#4). Secure it
with an Axle (#25), two M10 x ¾” Allen Bolt (#36), and two Ø ¾” Washers (#40). Do not
over tighten the Bolts. Make sure the Leg Developer is able to swivel.
B.) Insert two Foam Tubes (#12) halfway through the holes on the Leg Developer. Push four
Foam Rolls (#23) onto the Tubes from both ends. Plug four Foam Roll End Caps (#29)
into the ends of Tubes.
C.) Slide an Olympic Sleeve (#27) onto the weight post on Leg Developer. Attach a Ø 2”
Spring Clip (#24) onto the Sleeve.
DIAGRAM 3
7