I-Control manual
page 7
Manual flushing of a group
If so desired, a group can be flushed manually. On the main screen press the '1/S-FLUSH' key. An input field’
appears and the desired group can be set. Confirm “select valve …” with the 'ENTER' key, and this group will be
flushed during the set flush time.
Manual flushing of all groups
If so desired, all the groups can be flushed manually. On the main screen press the '3/T FLUSH' key. Confirm “total
flush” with the 'ENTER' key to flush all groups consecutively.
Customizing settings
User settings can be changed by using the
key. When pressing this key, a menu appears on the main screen.
By using the
and
key, the items in this menu can be scrolled through. Press the
key to select an
item.
The cursor keys
and
are used to scroll through the functions of the selected menu. A setting can be
adjusted by pressing the
key. The setting is displayed in a new window, and a new value can be entered.
Press the
key again, and the new value will be stored in the memory. Hereafter the I-Control functions with
the new values.
Note 1:
Functions showing a measurement, such as a measured temperature, can neither be selected nor adjusted.
Note 2:
Dependent on the settings of the installer’s program, some menus and/or functions are not displayed.
Press
to return to the previous menu or press
to exit and immediately return to the main menu.
It is also possible to go directly from the main screen to specific menus by pressing a shortcut key. The text on
these keys indicates the menu is linked to the shortcut.
Note:
Dependent on the status of the I-Control and installer’s settings, some shortcuts may not function. For
example, the shortcut
'
S-FLUSH
''
flushing with one valve does not respond when the I-Control is manually
switched off.
Alarm summary
Select this menu in the main menu by pressing the
key. Select “Alarm view” and press the
key. If
there is no alarm, the screen will read “No alarm”. If there is an alarm, the alarm will be clearly indicated on the
screen. An alarm is selected by using the
or
keys. Press the
key for the option to turn off the
alarm. If an alarm is turned off, the alarm relay will be restored (= no alarm). If the alarm is still present, the alarm
will return after several minutes.
.
Note:
On the main screen the alarm list can be chosen by pressing the “Alarm” key.
