I-Control manual
page 6
The number of flushings each day is displayed in the registration. The number of flushings based on temperature
(Flush temp), flushings based on pollution (Flush dirty) and flushings based on start times (Flush time) are
displayed. The screen also indicates the amount of liters flushed on this particular day.
By pressing the
key repeatedly, scroll down to the last line indicating the total liters of this
round.
By using the
or
keys, the registrations of today and to 7 days previously can be read.
Turning I-Control on/off
The I-Control can be turned off when the house is empty. It is also possible to temporarily turn off the flushing
process, such as during medicine dosage into the drinking water. Proceed as follows:
Press the shortcut '5/STOP. The following screen is displayed:
You can choose to stop the I-Control completely (house is empty) or stop temporarily.
I-Control compete stop:
-
Press the 'ENTER' key and the I-Control will stop completely. No flushing will take place until the I-Control
is turned on. A one-time time filling of the lines is still possible.
I-Control temporary stop:
-
Press the 'DELETE' key.
-
An input screen is displayed. The time (hours-minutes) for how long the flushing should be blocked can be
set.
-
Confirm with the 'ENTER' key.
If the I-Control is manually turned off, it can be restarted with the shortcut key:
- Press the '5/STOP' key.
- Confirm with the 'ENTER' key.
Stop a running flushing process in case of an emergency:
-
Press the
key in the main screen.
-
The following screen is displayed:
-
Choose to
the action or choose
to stop the running flushing process.
Start/stop flush
Stop/block flush?
Cancel Time Stop
Cancel delete enter
Stop flush
Stop flush?
Cancel Stop
Cancel enter
