I-Control manual
page 11
This menu concerns the starting times at breakpoint 0 (see text in the screen heading). By pressing the
or
key, you can browse through the 6 breakpoints. This explanation describes only one break point. The
remaining breakpoints can be set in the same manner.
Curve mode
(off – on)
Using this setting, the operation of the curve is turned on or off.
OFF
= The curve control is turned off and the start times are manually set in the menu “Time control”.
ON
= The curve control is turned on and the start times in the menu “time-based control” are set automatically by
the curve. Manually setting of the start times are no longer possible.
Note:
This function is only in the breakpoint 0 menu.
Day number
(0 to 1000)
This is the day number on which the breakpoint is to start. From this day number the start times will be set as they
are selected in the corresponding menu.
Note:
This function is only displayed in the breakpoint 1-5 menu. This
feature is not in the menu of breakpoint 0 as breakpoint 0 is always on day 1, the initial curve.
Start time 1
(00:00 to 23:59 hours)
At a set time a flush will start. If you do not wish to use this set start time, set at 00:00.
Repeat day 1
(1 to 14)
Flushing can be set on a daily basis or on a given number of days. There are 4 start times. When set at 1, the start
time is every day; 2 = every 2 days; 3 = every 3 days, etc. The start settings 2 to 4 can be set the same way.
Time/Date
Select this menu by pressing the
key in the main menu. Select “Time/Date” and press the
key. The
functions in this menu are the time and date settings.
Time
(00:00 to 23:59 hours)
This is the current time. The I-Control offers a real time clock with backup; the clock functions during power failure.
With power failure longer than 3-5 days, the backup becomes empty; the clock is to be manually set at the correct
time when the power is restored.
Date
(01-01 to 31-12)
This is the current date.
This function has no additional use in the flushing process.
Year
(2000 to 3000)
This is the current year. This function has no additional use in the flushing process.
Day counter
(1 to 1000)
This is the day number when the curve will be carried out. There is a daily update at 00:00 hours.
Note
: At the start
of a new round this day counter is automatically set at 1.
Medicine calculation
Select this menu by pressing the
key in the main menu. Select “Medicine calculation” and press the
key. Using this menu, the required amount of medicine is calculated. To do this, a various parameters must be
entered, and the I-Control immediately calculates the amount of medication is to be added to the drinking water.
Nbr animals
(0 to 999,999)
Enter the number of birds present in the house.
