background image

©IMPEX INC. www.impex-fitness.com

 

Beginning a Strength Building Program 

 

Warming Up 

 
To begin strength training, it is important to stretch and perform light exercise for 5 to 10 minutes. 
This helps prepare the body for more strenuous exercise by increasing circulation, raising your body 
temperature and developing more oxygen to your muscles. 
 

Workout 

 
For each workout, keep in mind that muscle soreness that lasts for a long period in not desirable and 
may mean that injury has occurred. 
 

Cool Down 

 

At the end of each workout, perform slow stretching exercises for 5 to 10 minutes. Ease into each 
stretch only going as far as you can. This stage allows your muscles to wind down after training. 
 
To provide a total workout program it is also recommended that 2 to 3 days of aerobic exercise be 
performed in addition to the strength training. 
 

Drinking Water 

 
For the body to function properly, it must be properly hydrated. If you are exercising, you should 
increase your fluid intake. The reason for this is that the water you take in will leave your system 
through the sweating mechanism that cools your body during exercise. The water you lose through 
exercise must be replaced so that the muscles can recover properly. 
 

Rest Day 

 
Although you may not feel like doing it, taking a rest day at least once a week is important because it 
gives your body a chance to heal it self. Continuously working your muscle will result in over training 
which will not benefit you in the long run. 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание COMPETITOR PRO CB-2982












Отзывы: