Imperial Kitchen Ventilation WH2000, Инструкции по установке и информация о гарантии

Страница: 3 / 17

Wall Mount Installation Detail:
MODELS: MODELS:
WH2000PS WH2000PS1-TW
WH2000PSB WH2000PS1-TWB
WHN2000PS WHN2000PS1-TW
CAUTION: Be sure that incoming power is turned off.
1. Locate height of range hood.
2. From bottom of hood, measure 6” up for PS model 10” up for PSB
models and draw a line.
3. Take “U” shape installation bracket and line the bottom of the
bracket up with the line (center bracket left to right) install bracket
using #10 x 2-1/2” wood screws, if you have wood to screw in to.
If not use the 3/16” x 3” toggle bolts.
4. Lift up hood and connect hood brackets to installation bracket
using (8) 10-32 Hex Keps nuts. Make sure hood is level before
you tighten all screws.
5. Use (2) 3/16” x 3” toggle bolts or #10 x 2-1/2” wood screws and
(2) 1-1/4” OD Fender washers to secure to back of wall.
6. To install duct cover, remove tape on brackets, line up duct cover
and attach to brackets.
*It is NOT recommended to use 2 dampers during installation. You have the option to
put a external damper or use the existing damper already on the unit.
Duct Sizes Indicated in Model # (Ex: WH2048PS-K)
** - 8 = 8” DUCT PIPE
** - K=10” DUCT PIPE
If not indicated by an 8 or a K, duct pipe is 7” Round.
Refer to #5
Brackets
TOP