COMTEST User Guide
17
Version. 3.1 November 2003
IMPACT
Scotland, United Kingdom
Each set of results is identified by a log number : 00 (most recent) to 99 (oldest). Use
the
ENTER
and
RESET
keys to bring up older or newer sets respectively. Within a
set, use
UP
and
DOWN
keys to scroll the list.
Each Test results set contains:
Number
identifies the set's position in the log.
Date
when the test was carried out.
Time
when the test was carried out.
Reference
the Test identifier - See section 2.2
Fail
the load at the point of sample failure.
Pace
the rate used when the test was carried out - Section 2.2
Sample
a description of the selected type - Section 2.3
X Area
cross sectional area of the selected sample. This is obtained from the
type and dimensions described in Section 2.3
Stress
the stress level (Load/XArea) at the point of sample failure.
2.6 Print Test Results Function
This function allows you to produce a permanent hard -copy of test
results, either directly on a printer, or a PC in text -capture mode.
Remember to set your device baud rate as 9600 and 8bits,1Stop no parity
.
You will be presented with 3 options
All Logs
Dumps the whole non-volatile memory contents. Only valid test results
will be printed.
COMTEST Print
All Stored Logs
Last Log Only
Today’s Logs