Setup
Installation Instructions
1. Use the wall plate to mark the
position of the mounting holes on
the wall.
2. Drill holes in the marked locations.
Make appropriately sized holes
for the wall anchors, molly bolts,
or toggle bolts. If you’re using wall
anchors, tap the anchors into the
holes.
Note:
Many wall anchors and molly bolts are self-tapping and don’t require a
drill for installation.
3. Put the plate against the wall, and insert screws (for wall anchors), molly
bolts, or toggle bolts through the holes, and fasten them until they’re fully
tightened, and the the plate is secure.
Note:
When screwing the plate
directly into a wall stud, make sure
at least two screws are attached
to the stud.