iMotion SC511, Руководство пользователя, Страница: 8 / 61

iWaylink Inc.
iMotion SC511 User Manual 8
Table 3 - Product Features and Functions of the SC511 from the Rear View
Connecting the scanner
Connect the scanner to the dedicated connector on the USB cable and plug
the other end into the USB port of your PC.
Reading Tips
Press the scan button so that the red line aiming point is aligned with the
barcode and the barcode can be read from any direction.
If the barcode is small, make the scanner close to the barcode. If the barcode
is large, the scanner should be away from the barcode, so that it is easier to
read the barcode correctly.
If the barcode is highly reflective (owing to the surface coating, etc.), you may
need to tilt the scanner at an angle to scan the barcode successfully.
No. Product
Features Function
○
3
Indicator Light
Red light when power is connected.
When decoding is successful, a beep will sound and
a blue light will illuminate once.
If the decoding is successful and no barcode is
transmitted to the computer, please check again if
the interface settings, cable installation or receiving
software are correct.
○
4
Line
Replacement
Hole
Insert a paper clip into this hole until you hear a
"click.” The cable can be removed from the cable
connection hole and the new cable can be inserted
according to original shape of the hole. When you
hear a “click,” it means that the cable has been
replaced.

Cable
Connection
Hole
Where the cable is connected/replaced.