66
12.2 Protocol Config
After opening i3 configurator, choose
Program
Protocol Config
, and select the port drop-down box to
select a protocol device driver. All protocol device drivers currently loaded in i3 configurator are displayed
in the dropdown selection. Some i3 models can be limited in the number of ports or number of protocol
device drivers that can be selected. Once a protocol is selected, the Network, Devices, and Data (Scan List)
must be configured through corresponding dialogs accessible through the respective buttons (Network,
Device, and Scan List.)
Figure 12.1 – Protocol Config Dialog
Three fields must be configured after a protocol is selected:
1.
Network
2.
Devices
3.
Scan List
Содержание i3N Series
Страница 1: ...Think inside the box User Manual For i3 N Series Controllers...
Страница 39: ...39...
