Immergas VICTRIX ZEUS SUPERIOR 25, Инструкции и рекомендации, Страница: 115 / 128

115
INS
TALLER
U
SER
M
AINTEN
AN
CE
TECHNI
CI
AN
TECHNI
CAL
D
AT
A
4.3 TECHNICAL DATA TABLE
Victrix Zeus
Superior 25
Victrix Zeus
Superior 30
Victrix Zeus
Superior 35
Domestic hot water nominal heat input kW (kcal/h) 25.9 (22280) 30.9 (26598) 34.8 (29967)
Central heating nominal heat input kW (kcal/h) 20.8 (17909) 29 (24976)
Minimum heat input kW (kcal/h) 2.5 (2143) 3 (2554)
Domestic hot water nominal heat output (useful) kW (kcal/h) 25 (21500) 30 (25800) 33.8 (29068)
Central heating nominal heat output (useful) kW (kcal/h) 20.2 (17372) 28.2 (24252)
Minimum heat output (useful) kW (kcal/h) 2.3 (2012) 2.8 (2408)
*Effective thermal efficiency 80/60 Nom./Min. % 97 / 95.4 97.1 / 94.3
*Effective thermal efficiency 50/30 Nom./Min. % 105.1 / 105.7 105.4 / 103.7
*Effective thermal efficiency 40/30 Nom./Min. % 107.1 / 108,8 106.8 / 108,0
Casing losses with burner On/Off (80-60°C) % 0,38 / 1,40 0,57 / 1,40 0,51 / 1,40
Chimney losses with burner On/Off (80-60°C) % 0,01 / 2,10 0,01 / 1,60
Central heating circuit max. operating pressure bar (MPa) 3,0 (0,30)
Maximum heating temperature °C 90
Adjustable central heating temperature (min. operating field) °C 20
Adjustable central heating temperature (max operating field) °C 85
System expansion vessel total volume l 5.8 7.1
Expansion vessel pre-charged pressure bar (MPa) 1,0 (0,10)
Appliance water content l 4.7 7.3
Head available with 1000 l/h flow rate kPa (m H
2
O) 1,03 (mca/kPa) 1,2 (mca/kPa)
Hot water production useful heat output kW (kcal/h) 25 (21500) 30 (25800) 33.8 (29068)
Domestic hot water adjustable temperature °C 10-60
Domestic hot water circuit min. pressure (dynamic) bar (MPa) 0,6 (0,06)
Domestic hot water circuit max. operating pressure bar (MPa) 8,0 (0,80)
Flow rate capacity in continuous duty (∆T 30°C) l/min 12.4 15 16.9
Weight of full boiler kg 119 121.9
Weight of empty boiler kg 63.9 64.2
Electrical connection V/Hz 230 / 50
Nominal power absorption A 0.7 0.8 1
Installed electric power W 95 110 130
Pump absorbed power W 45 57 59
EEI value - ≤ 0.20 - Det. 3
Fan power absorbed power W 40 42 68
Equipment electrical system protection - IPX5D
Max temperature of combustion products °C 75
Max. flue overheating temperature °C 120
Ambient operating temperature range °C 0 ÷ 40
Ambient operating temperature range with optional antifreeze kit °C -15 ÷ 40
NO
X
class - 6
Weighted NO
X
mg/kWh 23 21
Weighted CO mg/kWh 15 16
**Type of appliance -
C13-C13x-C33-C33x-C43-C43x-C53-C53x-C63-
C63x-C83-C83x-C93-C93x-C(10)3-C(12)3-C(15)3-
C(10)3x-C(12)3x-C(15)3x-B23p-B33-B53p
Category - II 2H3P - I 3P
* The efficiency values refer to the lower calorific value.
The data relating to domestic hot water performance refer to a dynamic inlet pressure of 2 bar and an inlet temperature of 15°C; the values
are measured immediately at the boiler outlet, considering that to obtain the data declared, mixing with cold water is required.
The weighted NO
x
value refer to the net calorific value.
** For type C63 it is forbidden to install the appliance as it came out of the factory, in configurations that require shared flues in positive
pressure.