Immergas RAPAX 300 ERP, Предупреждения и инструкция

Страница: 50 / 56

50
• Installation does not comply with regula-
tions, standards, professional rules, especial-
ly:
- Missing or incorrectly fitted new safety unit,
modification of calibration, etc.
- Sleevings (cast iron, steel or insulating) miss-
ing on hot water connection pipes, leading to
their corrosion.
- Faulty electrical connection: incorrect earth-
ing, inadequate cable section, connection of
flexible cables without metal terminations,
failure to comply with connection diagrams
specified by the Manufacturer.
- Powering up the appliance without first filling
it (dry heating).
- Placing the appliance without consideration
of manual instructions.
- External corrosion caused by poor sealing on
pipes.
• Faulty maintenance:
- Abnormal scaling of heating elements or
safety units.
- No maintenance of safety unit, leading to
excess pressure.
- No maintenance on magnesium anode
(magnesium anode diameter must be 10mm
at least).
- No cleaning of evaporator or condensate
evacuation.
- Modification of original equipment, without
notifying the manufacturer, or use of spare
parts not recommended by the manufacturer.
5.10 DECLARATION OF CONFORMITY.
• This device is compliant with directives
2004/108/EEC on electromagnetic compati-
bility and 2006/95/EEC on low voltage
• Directive R&TTE 1999/5/EC * (* Directive on
radio equipment and terminal telecommuni-
cations equipment).
Description: Digital c Radio mod-
ule.
Type:
Radio Transmitter – Receiver
868 MHz.
We hereby declare that mandatory 2011/65/UE
ROHS radio tests have been carried out.
• This appliance has been designed to serve one
residential housing unit only (and similar) sub-
ject to assessment of the energy requirement for
domestic hot water; it is not a heating system
pursuant to the legislation in force".