IMG BRASIL BIMG METVISA FTE.150 Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 40

IMG BRASIL BIMG METVISA FTE.150 Скачать руководство пользователя страница 21

25

IMPORTANT

This equipment not intended to be fully immersed in water for cleaning.

Follow the instructions below to find out how to take special care of the equipment.

Carry out the cleaning on the inside, outside and the rubber of the oven as many times as

possible to prevent food residues from drying out and stick to the parts. For cleaning, dilute soap or
neutral detergent or ammonia-based remover in warm water and apply with a soft cloth. With a cloth
moistened with water, rinse and then wipe the parts with a dry cloth.

Never use abrasive products (sapoly, brushes or steel wool) or solvents on any surface of the

equipment as it will damage the parts.

CAUTION!

It is extremely important that products used in cleaning ensure maximum cleanliness and are
non-toxic.

IMPORTANT

Keeping the inner walls of the oven chamber clean helps in conserving heat. When the oven is
not in use, keep the door open.

5.2 Maintenance and Behavior in Case of Breakdowns

The operator must be instructed to perform routine inspections, making minor adjustments,

cleaning and observing signs of breaches that may occur. Examples include: checking for extraneous
noise; non-execution by the equipment to the service to which it is proposed; among others. Actions
such as these are essential to ensure a longer equipment life.

CAUTION!

When servicing (even minor adjustments), always check that the equipment is disconnected
from the mains and the inside of the oven at room temperature.

It is recommended to carry out preventive maintenance every 6 months, checking and

adjusting clearances, cleaning internal parts, etc. When detecting broken or weakened parts, replace
with original parts.

By performing preventive maintenance, you eliminate the inconvenience of getting the

equipment stopped when you need it most, reducing the cost of maintenance and reducing the risk of
accidents.

CAUTION!

Preventive maintenance requires a trained professional.

Whenever any item regarding the safety of the equipment (such as cleaning or maintenance) is
removed, reset it and confirm that it is performing its function correctly.

«
...
19
20
21
22
23
...
»

Содержание BIMG METVISA FTE.150









































Отзывы:

Нет отзывов