23
EN
•
Thoroughly wash the area to be treated and dry carefully.
•
Remove the protective cap (8) from the roller, if present.
•
Choose the most suitable roller for the area to be treated: fine
smoothing roller (violet) (1B) for delicate areas and the coarse
smoothing roller (pink) (1A) for difficult areas.
•
Mount the smoothing roller (1A, 1B) on the body of the appliance
(Fig. A) and make sure it is engaged properly.
•
Activate the appliance: press the safety button (3) and
simultaneously slide the On/Off switch (2) upwards to the On
position.
•
The LED (5) lights up autonomously when the appliance is
switched on.
•
Gently slide the roller (forward and backward, right and left) without
applying excessive pressure on the areas with imperfections
(calluses, hard skin) for 2-3 seconds.
•
Switch the appliance off and verify the softness following the
treatment. If it is not sufficient, activate the appliance once again
and pass over the area according to the instructions in the previous
point.
•
Verify once again. If necessary, continue to treat the area until the
desired softness is achieved.
ATTENTION! DO NOT apply excessive
pressure during operation so as not
to block the motor.
•
Switch the appliance off: press the safety button (3) and
simultaneously slide the On/Off switch (2) downwards to the Off
position.
