Imetec E1201, Инструкция по эксплуатации, Страница: 15 / 40

13
EN
USE
WARNING! Comply with the indications in the chapters
"Food contact" and "Quantity and maximum usage times".
WARNING! This appliance is not to be used if it has been
dropped or if there are visible signs of damage.
WARNING! DO NOT touch the moving parts.
WARNING! DO NOT remove the jug lid during operation.
WARNING! Risk of food contamination and damage to the
appliance. DO NOT place the jug in the microwave oven.
WARNING! DO NOT use the appliance empty.
WARNING! Switch the appliance off before removing the
jug.
WARNING! DO NOT use the safety system as an alternative
to the on/off switch.
• Position the seal on the blade plate [FIG B].
• Insert the blades inside the ring nut [FIG.C].
• Screw the ring nut onto the jug by turning it clockwise [FIG D].
• Place the jug on the motor unit [FIG. E].
• Fill the jug with solid and liquid ingredients.
• Close the jug with the lid.
• Connect the power plug to the mains socket.
• Start the blender by turning the on/off control to the desired position.
• If necessary, add extra liquid via the hole in the lid.
• Stop the appliance by turning the on/off control to position "0".
• Remove the plug from the power socket.
• Lift the jug from the motor unit.
• Remove the lid from the jug.
• Pour the mixture into a glass.