E210501X rev.1_ENG
16/11/2021
51
If the inconvenience should be repeated, turn off the machine, remove all power supplies and call the authorized
technical service center.
ATTENTION!
All extraordinary maintenance operations must be carried out only after disconnecting all the power supplies
(electricity, steam, gas, air). Any tests to be carried out after maintenance should be carried out only after
reassembling and fixing all the guards.
60. DRYING PROBLEMS
In case there are poor results in dried fabrics, check the following table.
PROBLEM detected
Probable SOLUTION
Fabrics come out with yellowish spots.
Check that the rinses performed with the washing
machine are accurate and completely eliminate
detergent residues. The PH must be between 5 and 6.
The fabrics come out yellowed.
Check that the drying temperature is compatible with
the expected temperatures for the fabric: it is possible
that the drying temperature is too high
The fabrics still come out wet.
Check the selected temperature: it may be too low.
Check the humid air intake: a clogging could limit its
efficiency
Check the load: it may be excessive and do not let the
air flow pass through the linen.
The fabrics come out hardened.
Check the temperature of the cycle, especially in the
case of pure linen fabrics. If the temperature is too
high the fabric tends to harden.
