7
4.3.
Sealing Cover
To install the Access station micro outside, or in an environment exposed to high
humidity, dust, or even to prevent thief, you must use the sealing cover to protect
the connectors and the USB dongle if used. The sealing cover provides an Ingress
Protection IP65.
Note: Ethernet cabling must be Cat5e or above, suitable for outdoor use (with
drain wire). For more details in cable types and maximum length see the power
supply § 5.2
4.4.
Site selection
Radio performance will depend on site configuration. Whatever the type of
installation, the station should be clear of massive obstacles or metallic surface
within 1m, since possibly altering operation.
4.4.1.
Indoor:
If the station is to cover a building on several floors, it is recommended to place it
mid-height of the building, but generally in the upper part of the room or area to
cover. The station should not be used within a metallic closet or in a technical
room with metallic door.
To ensure a maximum of performance, you must ensure to:
•
Avoid placing the Sigfox devices in the same room as the station.
www.ime.de
19-10-20
