IMC CAEMAX DX, Руководство пользователя

Страница: 37 / 92

D
x
Telemetry System
Manual Vers. 2.7
37
/
92
3.8 Configure Analog Output
Any measurement data channel of the D
X
can be assigned to one of the 6 analog outputs.
Select
Output → Output X
.
Figure 26: Analog output configuration
With Source , select the data channel to be displayed.
Check the
min/max = -10 V/+10 V box to set the upper/lower bounds of the measurement
range (see 3.6.4.3) to -10 V/+10 Volts. If the box is unchecked, the measurement range can
be defined by a two-point calibration.
Please note: Maximum/minimum analog output is ± 10 Volts.
When configuring through a web browser, confirm your input with the
Set button to resume it
to the D
X
.