IMB MB9018B, Инструкция по эксплуатации

Страница: 28 / 33

9
6.4. Speed adjustment of welding head
Click on the parameter setting interface, Motor speed
under button adjustment, speed range 10% - 100%，Click Button speed measurement。
6.5. Wheel angle adjustment
sleev Screw
Loosen the fixing screw and rotate the eccentric sleeve to adjust the angle between the
flower wheel and the welding head, so as to ensure that the thickness of each pressing edge
of the flower wheel is equal。
6.6. Adjustment of depth of wheel
Loosen the fixing nut, rotate the limit sleeve, adjust the stroke of the cylinder, and change
the indentation depth of the flower wheel。
Sleeve
Nut