English
English
029
028
Docking station
Remote control
Home button
Start / Pause
Right
Power on/off
Forwards
Left
WI-FI
Increase suction
power
Edge cleaning
Voice switch
Spot cleaning
Local cleaning
Charging contacts
Power display
CLEAN status button
Robot status
Display status
Charge
Display flashes red
Charging complete
Display flashes green
Operating mode
Display flashes green
Robot error
All displays flash
Low battery
Display turns red
Using the remote control
1
1
2
3
4
5
6
7
8
9
10
11
12
2
3
5
8
9
12
4
6
7
10
11
Press this button to turn on the device.
Press this button to send the robot back to the docking
station.
Press this button to turn on or off the device.
Press this button to move the robot forwards in the selected
mode.
Press this button so the robot turns right.
Press this button so the robot turns left.
Press this button to turn on Wi-Fi and connect the device.
Press this button to start local cleaning.
Press this button to put the robot in spot cleaning mode.
Press this button to send the robot back to the docking
station.
Press this button so the robot cleans along a wall.
Press this button to confirm the voice switch.
Note:
1. Place two AAA type batteries into the
remote control.
2. Remove the batteries if you will not use the
remote control for a longer period.
