3
Technical Data
Page 10 / 39
IMAGO Technologies GmbH
Strassheimer Str. 45; 61169 Friedberg; Germany; Tel. +49(0)6031-6842611
SoC
The VisionCam uses the TI Sitara AM572x SoC.
TI Sitara AM572x
CPU
2x ARM Cortex-A15 (32 bit)
CPU frequency
1.5 GHz
Memory
1 GB DDR3
Storage
The VisionCam uses a microSD card as mass storage device. It is accessible under a service hatch.
The card stores the bootloader, FPGA firmware and the Linux file system.
SD, SDHC and SDXC (> 32 GB) cards are supported. The maximum interface speed supported is UHS-I
(104 MB/s).
Real-Time Clock
The VisionCam provides a Real-Time Clock which is buffered by a supercapacitor. The capacitor takes
about one day of active power supply to charge fully up. Then, it can then supply the clock for about one
week.
The time can be adjusted with Linux either manually, by a NTP server on the internet, or by a local NTP
server.