20
Modify the terminator to be the letter 0x0D Example:
1. Read the "Enable Setting Code" (if it is already turned on, you can ignore it);
2. Read the "modify end character" setting code;
3. Read the data code "0", "D";
4. Read "Save"
；
5.8.3 Quick configuration terminator
Closing terminator
*to add the carriage return CR
Add carriage return and line feed CRLF
Add LF
Add tab stops TAB
Add terminator
ETX
5.9 Data segment editing
5.9.1 Data segment interception
The decoding information Data consists of 3 parts: [Start] [Center] [End].
The user can select part of the information to be output by reading the following setting
codes.
*Transfer the entire Data
Only transfer the Start segment
Only the End segment is transmitted
Only transfer Center segment
