Imagine Selenio X50, Инструкция по установке и эксплуатации, Страница: 90 / 136

Chapter 4
Advanced Audio Processing
76
Table 4-4 DTS Neural Surround Audio UpMix Parameters
Parameter Name Function Options
UpMix Status Indicates the state of the AAP mode

Uninitialized

Running

Not Running
(bypassed)

Not Running
Channel Config Controls the output channel configuration

2.1

3.1

4.1

5.1

6.1

7.1

Phantom 6.1

Phantom 7.1
Latency Specifies the latency profile of the up-mix

Low

High
DICE Processing Level Specifies the amount of DICE processing to perform 0 to 100
Depth Specifies the amount of front-to-back bias to apply to the
standard soundstage -100 to 100 ( 0 )
Front Width Specifies the amount of narrowing or widening to perform
on the front channels -100 to 100 ( 0 )
Surround Width Specifies the wideness of the surround channels -100 to 0 ( 0 )
LFE Cutoff Specifies the low-pass cutoff frequency of the LFE channel
(0 specifies no LFE channel)

0 Hz

60 Hz

80 Hz

100 Hz

120 Hz

140 Hz
Final Limiter Ceiling Specifies the threshold where final limiting on the
up-mixed output occurs

-12 to 0