Imagine Selenio X100, Инструкция по установке и эксплуатации

Страница: 96 / 178

Selenio X100
Installation and Operation Manual
84

Audio Control Style (Mono or Stereo)

Audio V-Fade (clean audio hotswitch)

Audio LOV Output Mode (Pass or Mute)

Fade Time (0 to 10 seconds in increment of 1ms)

V-Fade Mute Time (0 to 1 second in increment of 1ms)
Audio Output Routing and Delay
The following option categories are available in Audio Routing and Delay:

EMB 1 and EMB 2 Routing

AES Routing

Analog Routing

HDMI Routing

Format

EMB 1 and EMB 2 Output Delay

AES Output Delay

Analog Output Delay

HDMI Output Delay
Figure 3-32 Audio Output Routing Format Parameter Symbols
The Alignment Mode parameters are found in the various output sources ( Audio >
Output Routing and Delay > x Output Delay ). The Alignment Mode parameters make
it possible for you to use an Automatic delay controlled by the X100 (the default state).
Alternately, the Align Now option aligns all of the outputs according to your current
conditions (when routing from AAP sources), and leaves them in the same state.
The Automatic or Align Now alignment modes will attempt to align all audio and video
within a group of audio (processing channel 1 embedded ch 1-16, processing ch 2
embedded ch 1-16, AES outputs 1A-8B or a group of audio expander output channels).
This alignment will automatically compensate for delay through the AAP blocks when audio
is routed internally through the X100. If audio is routed
external to the X100, automatic
alignment is not possible (for example, routing audio though an AAP then to AES output
and looped back to AES input).
PCM present
P P D
Non-PCM
data present
= =
No data
present
T
Alignment
tone