![Imagine Selenio 6800 HUC6801+D Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/imagine/selenio-6800-huc6801-d/selenio-6800-huc6801-d_installation-and-operation-manual_2045396022.webp)
Chapter 2
Installation
10
Copyright © 2010, Harris Corporation
Installing the HUC6801
+
Module
The HUC6801
+
D module has double-width back modules. Due to high levels of heat
dissipation, the HUC6801
+
D module should not be installed in frames without fans. The
module cannot be installed in FR6802
+
DM and 6800/7000 series frames.
CAUTION
This module require no specialized installation or removal procedures. However, if you are
installing both front and rear modules, ensure that the back module is installed first before
plugging in the front module. Likewise, ensure that the front module is unplugged from the
frame before removing the rear module. See your frame manual for information.
Upgrading
Module
Firmware
This module’s firmware can be updated using CCS Pilot, CoPilot, or Navigator version
3.1.1 or higher, or the HTTP software upgrade tool. In order to perform these upgrades,
your frame must be equipped with a 6800
+
ETH module. See your frame manual for
more information.
Содержание Selenio 6800 HUC6801+D
