Platinum™ VX
Installation and Operation Manual
System Configuration
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
Version 1.2 | Page 151
Restrict Editor
Click the
Restrict Editor
button in the
Database Foundry
view to access the Restrict Editor.
The Restrict Editor enables you to restrict routing of selected logical sources to logical destinations.
These restrictions are used to enforce business policy and reduce operator errors. Source Restrict
definitions are in sets; you can define one or more source restrict sets, and each set consists of a list of
one or more logical sources restricted from being routed to a list of one or more logical destinations.
You can define as many source restrict sets as required.
The database must be defined before any source restrict definitions, because Source Restricts apply to
the existing logical database.
The editor displays existing source restrict sets on the left, and the content of the currently selected
restrict set on the right. You can remove or edit an existing restrict set, or create a new one.
Rules when creating Restrict Sets
The following rules apply when creating a new restrict set:
The relation between destinations and sources defined in a restrict set is "
Any of
".
For example,
any of
the sources included into the restrict set cannot be routed to
any of
the
destinations included in that restrict set.
Restrict sets can be defined in any of the following formats:
One source to many destinations
Many sources to one destination
Many sources to many destinations
