Platinum™ VX
Installation and Operation Manual
Faults
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
Version 1.2 | Page 133
Faults
Module Faults
Module faults can be viewed by doing the following:
1.
Click the
Go to Frame
button on the main navigation page
2.
Click the
Open Module
button against a Module
3.
Click the
Faults
button to open the module specific Faults tab
Module faults are displayed with the following details:
Figure 77:
Module Faults
ID
: The Fault ID
Fault Name:
The Fault Name, for example,
Output Signal Presence
Error Level:
Major or Minor
Enable/Disable
: Whether the fault has been enabled or disabled
Priority
: The priority level of the fault (1-10)
Trigger
:
Clear (sec):
Ack
: Whether the fault has been acknowledged
Active
: Whether the fault is active
Also see System Fault Descriptions (on page 137).
