Platinum™ Predator II-GX 2RU
Chapter 4
Installation and Operation Manual
Using ZConfigurator
© 2014 Imagine Communications.
Proprietary and Confidential.
Edition E | Page 75
Timer External Source
The
Timer External Source
may be any of the following:
None
– no external time reference is used (free run)
LTC
- longitudinal time code (if LTC input available)
LTC can be used to lock system time or timers, but not both simultaneously. If LTC is used to synch
system time, the
Timer External Source
selector will be grayed out. A clock locked to LTC can be
used as a Time Code Reader.
Horita
- sync to an LTC to serial interface converter from Horita (no longer available). Requires one
of the COM ports (
System Setup
>>
Communication Ports
tab) to be set to Horita RTC.
See also the
Using Clocks and Timers
topic in the
Help
file that ships with
ZConfigurator
for more
information about clocks and timers.
Managing Language Packs and Fonts
The system fonts that an attached Predator II multiviewer uses to display on-screen features can be
changed from a choice of fonts installed to the multiviewer.
The fonts menu is not available on multiviewers that do not support this feature.
