Platinum™ IP3
Installation and Operation Manual
Video Crosspoint Module (PX-576x1024-3G/PX-288x512-3G)
© 2016 Imagine Communications Corp.
Proprietary and Confidential.
September 2016 | Page 80
Video Crosspoint Module Parameters
The Video Crosspoint Module can be accessed and controlled via the web-based Platinum IP3 Controller.
Access the Module in the
Crosspoint Cards
section in the list of Modules, and click
Open Module
.
Table 28:
Video Crosspoint Module Parameters
Name
Description
Type
Options
Module Status
Displays current status of module.
RO
Module Ready
Firmware Upgrade Required
Module Power Failure
Module Over Temperature
Enable Power
This parameter is used to turn the
power to the board back on if the
board had shut down due to over
heating.
RW
No
Yes
Board Temperature (1-2)
(Table Parameter)
Board Temperature in degrees
Celsius.
RO
-40 ~ +140 deg C
Temperature Alarm
Indicates if there is a temperature
alarm on this board.
RO
Yes
No
